SKB 3I-0907-MC3 I-Series 3 Microphone Case
SKB 3I-0907-MC3 I-Series 3 Microphone Case Overview:
The 3i-0907-MC3 allows 3 mics to be stored horizontally. Each microphone cutout measures 1.5" wide by 6.75" long with two perforated removable foam pieces, one located on each end allowing microphone sizes up to 8.5" in length. By removing the perforated foam piece near the grill of the microphone you can change the shape from being round to square. This will accommodate other popular hand held microphones with square style grills such as the Sennheiser and Electro Voice mics. The 3I-0907-MC3 case measures 9" x 7" x 4" deep and is the most compact 3-mic case on the market. The case has convoluted foam in the lid for a compression fit and is covered by SKB's Unconditional Lifetime Warranty.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, Trigger Latch System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
Features:
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
- Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
- Resistant to corrosion and impact damage
- Continuous molded-in hinge
- Trigger Latch System
- Rubber over-molded cushion grip handle
- Custom cut foam to hold six microphones
Specifications:
- Exterior: Hard
- Product Weight: 2.73 lb
- Exterior Length: 10.5 in
- Exterior Width: 9.5 in
- Exterior Height: 4.75 in
Original: $8,479.00
-70%$8,479.00
$2,543.70More Images
SKB 3I-0907-MC3 I-Series 3 Microphone Case
SKB 3I-0907-MC3 I-Series 3 Microphone Case Overview:
The 3i-0907-MC3 allows 3 mics to be stored horizontally. Each microphone cutout measures 1.5" wide by 6.75" long with two perforated removable foam pieces, one located on each end allowing microphone sizes up to 8.5" in length. By removing the perforated foam piece near the grill of the microphone you can change the shape from being round to square. This will accommodate other popular hand held microphones with square style grills such as the Sennheiser and Electro Voice mics. The 3I-0907-MC3 case measures 9" x 7" x 4" deep and is the most compact 3-mic case on the market. The case has convoluted foam in the lid for a compression fit and is covered by SKB's Unconditional Lifetime Warranty.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, Trigger Latch System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
Features:
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
- Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
- Resistant to corrosion and impact damage
- Continuous molded-in hinge
- Trigger Latch System
- Rubber over-molded cushion grip handle
- Custom cut foam to hold six microphones
Specifications:
- Exterior: Hard
- Product Weight: 2.73 lb
- Exterior Length: 10.5 in
- Exterior Width: 9.5 in
- Exterior Height: 4.75 in
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
SKB 3I-0907-MC3 I-Series 3 Microphone Case Overview:
The 3i-0907-MC3 allows 3 mics to be stored horizontally. Each microphone cutout measures 1.5" wide by 6.75" long with two perforated removable foam pieces, one located on each end allowing microphone sizes up to 8.5" in length. By removing the perforated foam piece near the grill of the microphone you can change the shape from being round to square. This will accommodate other popular hand held microphones with square style grills such as the Sennheiser and Electro Voice mics. The 3I-0907-MC3 case measures 9" x 7" x 4" deep and is the most compact 3-mic case on the market. The case has convoluted foam in the lid for a compression fit and is covered by SKB's Unconditional Lifetime Warranty.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, Trigger Latch System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
Features:
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
- Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
- Resistant to corrosion and impact damage
- Continuous molded-in hinge
- Trigger Latch System
- Rubber over-molded cushion grip handle
- Custom cut foam to hold six microphones
Specifications:
- Exterior: Hard
- Product Weight: 2.73 lb
- Exterior Length: 10.5 in
- Exterior Width: 9.5 in
- Exterior Height: 4.75 in
